Please select a Product

Print Print this Page

Paya Resin                                                  Products Data Sheet


Description:PAYTEX-NL 10C is a high butadiene carboxylated styrene butadiene copolymer contain an anionic/nonionic emulsifier system for combination with cement, lime, gypsum,… PAYTEX-NL 10C has a liquefying effect and reduces the water requirement at the same mortar without PAYTEX-NL10C.This latex not required film forming agent and plasticizer and has no corrosion promoting action on steel. Addition of PAYTEX-NL 10C improves: 1-work ability 2-flexural strength 3-abrasion water/chemical/alkalin region resistance 4-wet adhesion of fresh mortar.

Typical Data:

Property Value Unit
Appearance White liquid -
Solid 49-50 %
Ph 7-9 -
Viscosity * 300-800 Cp
Tg -10 ºC
Mfft(minimum film formation temperature) >0 ºC
Mechanical Stability Very Good -
Emulsifier A/N -
Plasticizer 0 -
Specific Gravity(at 25ºC) 1.01 g/cm3  

*Brookfield viscometer DV-II+pro sp 63,100rpm . must be stored in 5-40 ºc and under cover to avoid rain,frost and sunlight.
A Primary material for industries without of environmental problems. These data are typical values and cannot be construed as a specification.
Packing: 200 kg PE (Poly Ethylene) drum.Bulk (4000 kgs and 13000 kgs) in stainless steel tank.
Uses: Use for Builing, Ceramic, industry .

Address:No.11, ninth St., first Phase,industrial serahi Mobarake Township, Isfahan, Iran
Fax: +983152374304